Home   Donate   New   Search   Gallery   How-To   Books   Links   Workshops   About   Contact

Canon 5D Mark II
Users Guide
© 2010 KenRockwell.com. All rights reserved.

5D Mk II Review  Specs  Performance  Compared  Usage  Recommendations

Diagrams   What's New   What's Old   Sales Fluff   Lenses    Video

Please help KenRockwell..com

Canon 5D Mark II

Canon 5D Mark II and 50mm f/1.4. enlarge.

 

May 2010    Canon 5D Mark II Review       More Canon Reviews

 

Canon 5D Mark II Lens Recommendations

 

Adorama pays top dollar for your used gear.

B&H Photo - Video - Pro Audio
I use these stores. I can't vouch for ads below.

Introduction         top

This page will grow into an index for a full Canon 5D Mark II users guide.

For now, it's a collection of my tips and tricks — so far.

 

Set the LCD brightness         top

By default, the 5D Mark II varies its LCD brightness automatically.

This sounds nice, but it will drive you crazy because the screen gets dimmer as you turn to try to look at it in shadow!

I set it to one fixed value by pressing:

MENU > WRENCH •• > LCD Brightness > SET > Manual > SET.

The middle "4" setting is ideal.

Shooting outdoors at night, "2" is best.

Shooting in direct sunlight, "5" is ultra-bright, but it will blind you indoors.

I put this menu option in the MY MENU menu for easy access.

 

Image Settings         top

Color

For people, I shoot in the STANDARD [*S] Picture Style setting (you get there by hitting the top left "*" button), and change only the saturation to +2.

For everything else, I usually set +3 for saturation.

I usually shoot in Auto White Balance (AWB), but trim the colors to add 5 steps of amber (A5).

 

ISO

I shoot at AUTO ISO most of the time. That's the setting next to L, one or two down from ISO 100.

If shooting action in the dark, since Auto ISO usually lets the camera drop to too slow a shutter speed (1/3 of a stop slower than 1/focal length), I'll dial-in ISO 1,600 or whatever I need to keep the speeds as I need them.

For example, with a 50mm lens, Auto ISO lets the shutter speed drop to 1/40, and with wiggly kids, I need 1/125.

In good light, I force the ISO to ISO 50 ("L") for the lowest shadow noise and highest sharpness, especially for rendering sharp textures which get smoothed at higher ISOs, even ISO 100. Even with the menu option set to disable noise reduction, the 5D Mark II still uses it.

Auto ISO always grabs ISO 400 with flash, I prefer something slower.

 

Tweaks

I always leave the shadow optimizer (Automatic Lighting Optimizer) ON, which is its default.

I usually enable highlight recovery (Highlight Tone Priority), except in good light. I don't use this in good light because I can't shoot at any slower than at ISO 200 with it ON, and ISO 200 gives visible noise in the shadows.

 

Exposure Compensation

My 5D Mark II usually gives the best results without any exposure compensation.

Colorful subjects in interesting light at +3 saturation can overload colorful highlights, so under these conditions with highlight optimization ("Highlight Tone Priority) OFF, I'll often set -0.7 compensation.

With highlight optimization ON, I find 0.0 compensation usually gives me the best results under most conditions.

No big deal; look at your LCD and use what looks best.

 

Exposure Lock         top

The 5D Mark II locks the exposure by default as you half-press the shutter.

Color Trims         top

It's easy to set precise green-magenta or amber-blue color adjustments.

Simply press:

MENU > CAMERA •• > WB SHIFT/BKT > SET > move the dot as you like with the thumb button > SET.

This setting applies to every white balance position, even AUTO and Kelvin.

For instance, here's a shot at my default WB setting of AUTO with A5 trim, as I use for most subjects:

bath

Too orange!

I then made another shot at 2,500K WB, which wasn't orange, but now it was too green.

I tried a few other settings, and quickly settled on A5 (amber) and M5 (magenta) WB SHIFT, easily tweaked by looking at the LCD as I changed settings for each shot. The LEICA M9 can't do this!

Ho'olei 69-3

Maui Bathroom: Mixed CFL and halogen lighting, 2,500K A5 M5 WB. bigger.

File Formats

I shoot at LARGE JPG, and set it to NORMAL (the stair-step icon) instead of the LARGE (quarter-circle icon as shown below).

Canon defaults to the FINE (quarter circle icon) setting, so I always set the NORMAL options deliberately.

Try it yourself: I've never seen any difference between NORMAL and FINE, and I do notice the smaller file sizes which transfer faster and take up much less space in my computer.

 

Image Size

No one needs 21MP. All it does is slow everything and clog your hard drive.

Try shooting your 5D Mark II at its M (11MP) or S (5MP) settings. If you look at your images at 100%, you'll see that the lower resolution shots are sharper pixel-by-pixel!

When I'm photographing family and friends, I shoot at SMALL JPG. Even SMALL is good enough for great 20x30" prints.

The smaller-sized images out of the 5D Mark II are spectacular. They are much, much sharper and cleaner than images from cameras on which that is their native resolution. When you start with over 20MP, it looks pretty good if you use all those to make 11MP or 5MP.

Why? Because they use less, or no, Bayer interpolation. No digital camera really resolves its rated resolution; they cheat and interpolate up, so at 100% at its rated resolution, no digital camera image is as sharp as a true scan from film.

At the 5MP setting, you have 100% R, G and B pixels, exactly as if you were using a Sigma Foveon sensor. If Sigma was selling this, they'd sell the 5MP (S) setting as if it were 15MP (also a lie).

What this means is that the lower resolution settings actually pack away lot more detail than you think. The S (5MP) setting of the 5D Mark II is a lot sharper than any 5MP camera.

M looks almost as good as L for the same reason.

If you're testing lenses, sure, shoot at L, but for everything else, try the settings for yourself, You'll probably get what you need at the smaller settings. For instance, the 11MP setting of the 5D Mark II has way more detail than any of the 12MP (native) Nikon cameras.

The resolution advantage of the 5D Mark II is obvious, even at lower settings. Try them.

 

Flash

For people shots, I usually use a 220EX for fill-flash, and tape a piece of 1/4 CTO gel over the flash.

 

Autofocus

Modes

You have three choices:

 

ONE SHOT

Use this for still subjects. The camera focuses, and locks as soon as it gets focus. You then may recompose.

Use this, and wait for AF to lock, before you grab the focus ring with a lens with manual-focus override. Otherwise, the 5D Mark II will keep trying to pull focus control away from you.

 

AI SERVO

The camera keeps trying to focus as things move around. It never stops; it always tracks your subject in and out.

Don't use this setting if you want to use instant manual-focus override by grabbing your lens' focus ring: the 5D Mark II will keep trying to focus under you.

 

AI FOCUS

I use this most of the time. This clever setting usually selects whichever of the two settings above is appropriate, and uses it.

This setting cleverly locks itself when the subject is still, and tracks it when it's moving.

I only select ONE SHOT when I know I'm shooting stills, otherwise, for kids or whatever pops up, AI FOCUS is my choice.

You can use manual-focus override in AI FOCUS, but only if it has locked, which it rarely does. In most cases, the 5D Mark II will keep trying to focus in AI FOCUS unless you're on a tripod.

 

AF Point Selection

The thumb controller has 9 positions, so you can select any AF point in just one push. You never have to click around to get where you want.

For instance, if you have the left sensor selected and want the right sensor, just click right. On Nikon, you'd have to click right twice. Want the bottom sensor? Just click down from wherever you are.

Want to use all the sensors? Push the top right button on the back of the 5D Mark II; no menus required for any of this.

I use just the center point if I'm being careful in ONE SHOT, and usually select all sensors for general shooting in AI FOCUS.

The center sensor is more sensitive than the others in dim light. If the other sensors aren't doing well in dim light, choose the center sensor and you'll be much happier.

 

The Quick Control Screen         top

Quick Control Panel

Canon 5D Mark II Quick Control Screen.

You can control everything from one tap of the SET button, if you turn on this feature by pressing:

MENU > CAMERA••••• (C.Fn) > C.Fn IV Operation/Others > SET > 3: Assign SET Button > SET > 5: Quick Control Screen > SET.

Now when you tap SET, it wakes up a control screen on the rear LCD from which we can control everything with the dial, joystick and SET button.

Once you get this screen, use the thumb button to drive around, and the dial to change the setting. If you need more details about what you're setting, press the SET button again, but it's not necessary.

There's no need to press OK or DONE or EXIT. The instant you've changed something, it's done.

I do wish I could drive off one end of the screen and arrive at the other side, but it stops at the ends.

You can read and set apertures and shutter speeds on this screen, but in manual exposure mode, there is no indication for the correct exposure. For manual exposure, look at the bar graph in the finder or on the old top LCD.

If you tap the INFO button, you'll call up the very similar INFO screen, which does drive the bar graph to let you set read manual exposure.

 

INFO Screen         top

I didn't have a graphic for the Quick Set screen, so the screen shown above is more precisely the INFO screen you'll get if you press INFO twice.

They are the same, except that the bottom bar shows details on what you're setting if you're in the Quick Control screen.

If you call up this screen with the INFO button, it doesn't go away. To make this INFO screen go away, you have to press INFO again.

 

INFO Button

Tap this if you're not playing back, and it shows all sorts of goodies about how your 5D Mk II is set, the time and date, and how many shots and how much free space is left on your card.

Tap it again and the screen I showed above pops up, and won't go away until you press INFO again.

 

Total Recall Camera State Memories         top

Canon 5D Mark II knob

C1, C2 and C3 Total Recall positions. bigger.

Set these before you go out, and everything you'll need will be right at your fingertips all day or forever.

Each time you turn the dial to one of the C1, C1 or C3 positions, everything is reset to what was stored in that position.

Feel free to change any settings as you shoot in the C1, C2 or C3 positions. You won't erase what you saved. These changes will stay until the camera times-out, usually one minute (you can change that duration in the menus), and the next time you go to shoot, even if you had changed something, you're back at your saved settings.

If you want to return to the saved settings more quickly, just move the dial to any other position and return.

 

To Save a Suite of Settings

To save a complete camera-state setting of your 5D Mark II:

1.) Set the camera as you like. Everything is saved.

2.) Press:

MENU > WRENCH ••• > Camera user setting > SET > Register > choose the C1, C2 or C3 position > OK > SET.

 

To Make a Permanent Change to a Stored Setting

To change a stored setting:

1.) Set the dial to that setting, C1, C2 or C3. This recalls the setting.

2.) Change something.

3.) Save the camera's current state back into that dial position:

MENU > WRENCH ••• > Camera user setting > SET > Register > Carefully select the correct C1, C2 or C3 position > OK > SET.

If you select the wrong C1, C2 or C3, you will have overwritten the settings at that position.

 

To Make a Temporary Change to a Stored Setting

Just change something as you would anywhere else.

As soon as you select or re-select a C setting, or as soon as the camera goes to sleep and wakes up again after your preset Auto Power Off time, set by pressing:

MENU > WRENCH • > Auto Power Off > (select time period) > SET,

your originally saved C setting is recalled.

The C settings are not altered unless you deliberately save something into them as described above.

 

To Make a Longer Change to a Stored Setting

The 5D Mark II system allows all sorts of ways to make things easier.

As we just learned, if you change something in a C mode, after the camera resets in usually about a minute, all your temporary settings are reset.

What if you want to keep using slightly different settings for a longer period of time?

Easy!

If you want to save them for up to about a half-hour or so, while in a C setting, press:

MENU > WRENCH • > Auto Power Off > (select longer time period) > SET.

Now the 5D Mark II will work in your C mode in your new settings for that period of time after you make your last shot, and then after that time (30 minutes maximum), automatically reverts to whatever you saved in that C setting. (If you leave that C setting and return, it also resets instantly.)

Here's the clever part: you keep that setting for 30 minutes, and when the 5D Mark II resets to your saved C setting, the time-out period also reverts to whatever you saved before, probably one minute! Thus you can alter a C setting for a while, it won't change, and when you're done, Voilà!, you're back to where you wanted to be!

 

To Make a Longer Change to a Stored Setting

Let's not forget the usual P, Tv, Av and M positions.

When you change one of them, they stay that way forever.

The four of them together are sort of like an unlocked C setting: every time you come back to them, they are as you left them, but if you change something while in them, they stay that way.

If dealing with some weird light that requires odd White Balance settings, you may want to use the P, Tv, Av or M positions, and then if a different opportunity presents itself, flip into one of your C modes, and as soon as you click back into any of P, Tv, Av or M positions, you're where you left off.

Brilliant!

 

My personal Total Recall settings         top

Of course everything about the camera is saved into each of these memories. This is what I saved that changes for me from setting to setting.

 
C1
C2
C3
Used for
General Scenics
Family
Serious Scenics
Exposure Mode
Pro (P)
Pro (P)
Pro (P)
Resolution
M
S
L
Picture Style
+3 Saturation
+2 Saturation
+3 Saturation
ISO
Auto
Auto
ISO 50 (L)
Exposure Comp.
0
0
-2/3
Highlight Recovery
off
Shadow Recovery
AF
One Shot
AI Focus
One Shot
AF Sensors
Auto (all)
Auto (all)
Auto (all)*
Advance
Continuous (3.9fps)
Continuous (3.9fps)
Continuous (3.9fps)
LCD Brightness
Manual 5 (bright)
Manual 4 (normal)
Manual 4 (normal)
Movie Resolution
1920/23.98p*
640/29.97p*
1920/23.98p*

* I'll often go to just the central sensor by tappng the thumb controller.

** read as 24p and 30p in the menu system.

 

Shadow Lightening ("Automatic Lighting Optimizer")         top

I leave this on all the time, which is its default position.

You can can tweak this by pressing:

MENU > CAMERA•• (C.Fn) > C.Fn II: Image > SET > 4: Auto Lighting Optimizer.

It works well as needed, and leaves things alone if not.

 

Highlight Recovery (called "Highlight Tone Priority" in menus)         top

My house. Roll mouse-over to see with highlight recovery OFF.

Canon calls this "Highlight Tone Priority" in the menus. It is off by default. You set it by pressing:

MENU > CAMERA••••• (C.Fn) > C.Fn II: Image > SET > 3: Highlight Tone Priority : Enable.

Highlight recovery works by reducing exposure, and them lightening most of the of the image, except for the highlights. Everything stays the same, except that blown-out highlights might not blow-out, but only if you're lucky.

It rarely makes any visible improvement. This example is the one time it actually did. It only pulls-in about one more stop, and when you've lost a highlight, it usually is either further overexposed than that, or it's OK without any of these shenanigans.

"Reducing exposure" is another way of saying that it shoots at a higher ISO by default. You can't shoot at ISO 50 or ISO 100; with highlight recovery ON, it starts at ISO 200.

Sadly, the 5D Mark II has rather visible noise in the shadows at ISO 200, even in broad daylight.

Therefore, I avoid this feature for careful work, and leave it ON when I'm already using higher ISOs.

It's easy to assign this ON or OFF in the C1, C2 and C3 positions, so it's easy to have it turn ON or OFF as conditions change.

 

Long Exposures         top

The rear red pilot light stays on during long exposures.

I'd skip Long Exposure NR; I get great results without it even at 30 seconds.

 

Live View         top

I don't use this.

To get it to go, you need to activate it in a menu somewhere.

If you can find that, the live view (and movie-making) button is the one with the silver camera icon just to the left of the viewfinder eyepiece.

 

Video         top

You have to enable this in some menu before you can shoot.

Video capture is part of Live View. You can choose the Picture Style set for Live View to adjust sharpness, contrast, color saturation and white balance.

The rear LCD can be matted with a semi-transparent border to match the aspect ratio you've chosen.

Why I Don't Care.

 

Finder         top

With heavy carrying, the diopter setting sometimes changes. If the finder suddenly seems weird, reset the little dial on the top right of the eyecup.

 

Folders         top

It's easy to make new folders. I put this item in the MY MENU menu.

Each time you make a new folder, it's number increments by one. You can't name them.

It's easy to use this menu to see what folders you have, and what's in them.

I make a new folder each day. Sadly, unlike Canon's point-and-shoots, there is no option for having new, dated, folders automatically created for you each day. Again, the Powershot and EOS teams need to have sake together more often.

 

Peripheral Illumination Correction         top

The 5D Mark II can correct for light falloff for lenses for which correction data has been loaded into it.

The 5D2 can store data for up to 40 different lenses if you load it into your 5D3. About 26 lenses are preloaded.

For at least some of your lenses, you'll have to fetch and load this data into your camera the hard way so that the 5K Mk II can correct it:

1.) Install the EOS Utility software from the CD that came with your 5D2.

2.) Open the EOS Utility software.

3.) Connect your 5D Mk II via USB, then turn it on. (EOS Utility will start by itself if it's not open.)

4.) Click the "camera settings" option from the main screen of EOS Utility.

x.) Under the Shooting Menu (red camera icon) in the EOS 5D Mark II window that opens, click the "Lens Aberration Correction" line.

x.) A new, bigger window opens with a list of lenses.

x.) Check the lenses you want. If you run out of your 40 maximum, uncheck some of the lenses Canon had checked as default.

x.) Click OK.

x.) Click Main Menu.

x.) Click Quit.

7.) Now your camera has this data for eternity. No, I have no idea why this isn't presintalled at the factory as it ought to be.

Do this for every lens or lens and teleconverter combination you've got for which the camera has no data.

Oddly, almost every lens made by Canon is here, except the classic 80-200mm f/2.8L, which needs no correction, and the 20-35mm f/2.8L, which does.

 

AF Microadjustment         top

Don't touch this.

If you have to ask how to set it, then you'll probably make it worse if you fiddle with this.

If you insist on playing with it, know that only about one lens in twenty needs any adjustment, and the results are only visible at large apertures.

If you use zoom lenses, be forewarned that there is only one setting available per lens, and that zooms may need different settings for each focal length.

When you do set it, the 5D Mark II is smart enough to recall different settings for different lenses as you set them, automatically.

When setting it, use natural targets like trees. Don't use tilted flat targets, since the actual location of the AF sensors is never really exactly where they are marked in the finder.

To set it, you need to make many, many test shots to arrive at a setting. Every shot varies a little from shot to shot; no AF system gives the same result for each shot. Make at least 5 shots at every distance, and try every distance, since the settings can vary by distance.

It's marked in "Forward" and "Backward," which makes no sense. As observed, "Forward" means that the focus is pushed further away from the camera, and "Backward" means that focus is pulled closer to the camera.

 

Help me help you         top

I support my growing family through this website, as crazy as it might seem.

If you find this as helpful as a book you might have had to buy or a workshop you may have had to take, feel free to help me continue helping everyone.

If you've gotten your gear through one of my links or helped otherwise, you're family. It's great people like you who allow me to keep adding to this site full-time. Thanks!

If you haven't helped yet, please do, and consider helping me with a gift of $5.00.

The biggest help is to use these links to Adorama, Amazon, B&H and eBay when you get your goodies. It costs you nothing and is a huge help to me. eBay is always a gamble, but all the other places have the best prices and service, which is why I've used them since before this website existed. I recommend them all personally.

Thanks for reading!

Ken

Home   Donate   New   Search   Gallery   How-To   Books   Links   Workshops   About   Contact